manualshive.com logo in svg

Canon MF512 Series, User Manual, Page: 335 / 913

Share
Download
Canon MF512 Series User Manual Download Page 335

◼

[Scan] Tab

  Configure the settings that are applied when you scan a document by using

an application, and the settings for ScanGear MF operations.

[Scan without Using ScanGear's Window]

When you scan the document by using an OCR software or other application, the ScanGear MF screen may

not be displayed. In such a case, the document is scanned with the setting of the application applied.

However, if the application does not have the following settings, enable them here so that these settings are

applied for scanning.

[Color Mode (Text and Table)]

If the application settings are specified to scan documents in color, those settings are replaced and

documents are scanned with the ScanGear MF color mode set to [Color Mode (Text and Table)].

[Text Enhanced]

If the application settings are specified to scan documents in black and white, those settings are replaced

and documents are scanned with the ScanGear MF color mode set to [Text Enhanced].

[Automatically Quit ScanGear after Scanning]

The [ScanGear MF] screen automatically closes after scanning is complete. The screen may automatically

close with some applications regardless of this setting.

◼

[Color Settings] Tab

  Configure advanced color and brightness settings, such as color matching

and gamma correction.

[Color Correction]

Select the color correction method.

[Recommended]

Color tone is vividly reproduced on a computer display. This setting is recommended for most color

corrections.

[Color Matching]

Using the Machine as a Scanner

326

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments