manualshive.com logo in svg

Canon MF512 Series, User Manual, Page: 368 / 913

Share
Download
Canon MF512 Series User Manual Download Page 368

Adjusting Balance between File Size and Image Quality

0Y9U-064

  You can specify the file compression ratio when converting scanned documents into

the JPEG format. <Small: Memory Priority> makes the compression ratio higher than
normal to create smaller files with lower image quality. On the other hand, <Large:
Image Quality Priority> makes the compression ratio lower than normal larger files
with higher image quality.

<Scan>   Select <USB Memory> or specify a destination with <E-Mail>/<I-Fax>/<File>   <Data
Size>   Specify the setting

<Small: Memory Priority>

The data size is highly compressed and reduced, but the image quality becomes low.

<Standard>

The compression ratio and the image quality are adjusted to an intermediate setting between <Small:

Memory Priority> and <Large: Image Quality Priority>.

<Large: Image Quality Priority>

The image quality improves, but the data compression ratio decreased and data size becomes large.

LINKS

Scanning Documents Directly to USB Memory(P. 332)
Sending Documents as E-Mails Directly from the Machine(P. 335)
Sending I-Faxes(P. 224)
Saving Documents Directly in Shared Folder/FTP Server(P. 342)
Selecting a File Format(P. 351)

Using the Machine as a Scanner

359

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments