manualshive.com logo in svg

Canon MF512 Series, User Manual, Page: 802 / 913

Share
Download
Canon MF512 Series User Manual Download Page 802

Replacing Toner Cartridges

0Y9U-0CK

The machine will display a message when a toner cartridge is nearly empty. Note that the print quality becomes poor if

you continue printing without taking any action. You can check the amount remaining in the toner cartridge on the

display.

When a Message Appear(P. 793)
If Printouts are Poor in Quality(P. 794)
Checking the Amount Remaining in the Toner Cartridge(P. 794)

◼

When a Message Appear

Depending on which message is displayed, you will need to make sure that you have a replacement toner cartridge

ready or replace the toner cartridge.  How to Replace Toner Cartridges(P. 798)     Consumables(P. 865)

<Prepare a cartridge.>
<The cartridge needs to be replaced soon.>

This message notifies you that a toner cartridge needs to be replaced soon. Make sure that you have a

replacement toner cartridge ready. Replace the toner cartridge if you see this message before you start to print

a large job.

When this message is displayed

●

When copying or printing, you can continue printing the document.

●

If the machine is receiving a fax, or automatic report output is set, received faxes and reports will be
stored in the machine so that they do not appear faded after they are printed. To continue printing
even if the toner amount remaining in the cartridge is low, set <Continue Printing When Amount in
Cartridge Is Low> to <On>.  Continue Printing When Amount in Cartridge Is Low(P. 664)

Specify when this message is displayed

●

You can set any value as the percentage of the amount remaining in the toner cartridge that triggers
this message.  Display Timing for Cartridge Preparation Notification(P. 700)

<Cartridge has reached end of lifetime. Rplcmt. recommended.>

This message notifies you that a toner cartridge has reached the end of its lifetime. It is recommended that you

replace the cartridge with a new one. You can continue printing, but the print quality cannot be guaranteed.

Maintenance

793

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments