manualshive.com logo in svg

Canon MF512 Series, User Manual, Page: 64 / 913

Share
Download
Canon MF512 Series User Manual Download Page 64

Do not exceed the load limit line when loading paper

●

Make  sure  that  the  paper  stack  does  not  exceed  the  load  limit  line  (

).  Loading  too  much  paper  can

cause paper jams.

●

When loading paper with a logo, see  Loading Preprinted Paper(P. 62) .

4

Align the paper guides against the edges of the paper.

●

Press the lock release lever and slide the paper guides inward until they are aligned securely against the
edges of the paper.

Align the paper guides securely against the edges of the paper

●

Paper guides that are too loose or too tight can cause misfeeds or paper jams.

5

Insert the paper drawer into the machine.

●

When you insert the paper drawer with <Notify to Check Paper Settings> set to <On>, a confirmation screen
is displayed.  Notify to Check Paper Settings(P. 715)

»

Continue to  Specifying Paper Size and Type in the Paper Drawer(P. 67)

When changing the paper size or type

●

The  factory  default  settings  for  paper  size  and  type  are  <A4>  and  <Plain>,  respectively.  If  you  load  a
different size or type of paper into the machine, make sure to change the settings. If you do not change
the settings, the machine cannot print properly.

Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)

Basic Operations

55

Summary of Contents for MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments