Canon LX-P5510 User Manual Download Page 241

Page: 241 / 285

237

List of Error Messages/Warning Messages

Warning Message

Warning Content

Handling

The battery for the clock has
ran out

The clock's (RTC) battery needs
to be replaced.

Take note of the message
displayed and contact your
place of purchase.

Unknown warning XXXX

("XXXX" represents number)

An unknown warning was
returned.

If the same error occurs again,
update the printer drivers and
firmware to the latest versions.

If the same error occurs again,
take note of the message
displayed "XXXX" and contact
your place of purchase.

Ink refresh timing 1

Displayed when ink refresh has
not been performed.

Perform "Ink Refresh".

(

→

P.198)

Summary of Contents for LX-P5510






























































































































































































































































































Search results

Summary of Contents for LX-P5510

Reviews:

Related manuals for LX-P5510

Brands by name

Popular brands

Canon LX-P5510, User Manual

Search results

Summary of Contents for LX-P5510

Reviews:

Related manuals for LX-P5510

Brands by name

Popular brands