Canon LV-7290 User Manual Download Page 66

Page: 66 / 83

Maintenance and Cleaning

Filter prevents dust from accumulating on the optical elements inside the projector. Should the Filter become clogged

with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely

affect the life of the projector. If a “Filter warning” icon appears on the screen, replace the Filter immediately.

Replace the filter by following the steps below.

CAUTION

- Do not operate the projector with the filter

removed. Dust may accumulate on the optical

elements degrading picture quality.

- Do not put anything into the air vents. Doing so

may result in malfunction of the projector.

- Do not wash the filter with water or any other

liquid Matter. Otherwise the filter may be

damaged.

RECOMMENDATION

We recommend avoiding dusty/smoky

environments when you operate the

projector. Usage in these environments

may cause poor image quality.

When using the projector under dusty or

smoky conditions, dust may accumulate

on a lens, LCD panels, or optical elements

inside the projector degrading the quality of a

projected image. When the symptoms above

are noticed, contact your authorized dealer or

service center for proper cleaning.

Be sure to reset the Filter counter after cleaning or

replacing the filter.

Press the MENU button to display the On-Screen

Menu. Use the Point ▲▼ buttons to select Setting

and then press the Point ► or the OK button.

Use the Point

▲▼

buttons to select

Filter counter

and then press the Point

►

or the OK button. Use

the Point

▲▼

buttons to select

Filter counter

reset

and then press the OK button.

Filter counter

Reset?

appears. Select

Yes

to continue.

Resetting the Filter Counter

Filter counter reset

Filter counter Reset?

appears.

Select

Yes

, then

another confirmation

box appears.

Select

Yes

again

to reset the Filter

counter.

Another confirmation dialog box appears, select

Yes

to reset the Filter counter.

Replacing the Filter

Turn off the projector, and unplug the AC power

cord from the AC outlet.
Place the latch in the OPEN position and pull out

the filter in the arrow direction.

Slide the new filter (along the guide rails. Make

sure that the filter is inserted completely.) Place

the latch back in the LOCK position.

Filter

Latch

Connect the AC power cord to the projector and

turn on the projector.

Reset the filter counter.

OPEN

LOCK



Note:

• When replacing the

filter, it is required

a certain space to

pull out the filter

completely.

• When installing the

projector, install the

projector with keeping

a certain space for

replacing the filter.

Summary of Contents for LV-7290




















































































Search results

Summary of Contents for LV-7290

Reviews:

Related manuals for LV-7290

Brands by name

Popular brands

Canon LV-7290, User Manual

Search results

Summary of Contents for LV-7290

Reviews:

Related manuals for LV-7290

Brands by name

Popular brands