Basic Operation
7
Basic Operation
Sound Adjustment
1
2
Press the MENU button to display the On-Screen
Menu. Use the Point
▲▼
buttons to select
Sound
. Press the Point
►
or the OK button to
access the submenu items.
Press the /– buttons on the top control or
on the remote control unit to adjust the volume. The
volume dialog box appears on the screen for a few
seconds.
Press the MUTE button on the remote control unit to
select
On
to temporarily turn off the sound. To turn
the sound back on, press the MUTE button again to
select
Off
or press the /– buttons. The
Mute function is also effective for the AUDIO OUT
jack.
Press the OK button to switch the mute function
On/
Off
. When the sound is turned off,
On
is displayed.
Press the /– buttons again or adjust MIC
gain’s volume to turn the sound back on.
Use the Point
▲▼
buttons to select the desired
submenu item and press the OK button to access
the selected item.
Volume
Volume
Mute
Press the Point
►
button to turn up the volume;
Press the Point
◄
button to turn down the volume.
Mute
Menu Operation
Sound Menu
Volume Dialog Box
Remote control unit
button
VOLUME - button
MUTE button
Top Control
Approximate level of
the volume.
Press the MUTE button to set the Mute
function
On
or
Off
. The dialog box
disappears after 4 seconds.
Direct Operation
OK
POWER
AUTO SET
MENU
LAMP REPLACE
WARNING
VOL
VOL
/- buttons
Use the Point
▲▼
buttons to switch the MIC function
On
/
Off,
and then press the OK button. When
On
is selected, the synthesis volume (MIC and RCA) is
output.
MIC
MIC GAIN
Press the Point
►
button to turn up the MIC mixing
gain; Press the Point
◄
button to turn down the MIC
mixing gain.
AUDIO INPUT SELECTION (see pages 14-15)
Note:
• When
Off
is selected in MIC function, the MIC GAIN and STANDBY MIC OUT functions are not
available.
• Only the Standby mode is set to
Network
,
STANDBY MIC OUT
can be selected.
• If the MIC function is turned on when connecting PC audio to the AUDIO IN (a mini jack), loud
sound may be output suddenly depending on the setting value of MIC GAIN.
STANDBY MIC OUT
When setting the STANDBY MIC OUT function to
On
and in Standby mode status, only MIC input volume
can be output.
AUDIO IN
MIC Setup RCA L/R terminal
Mini jack
MIC Off
VIDEO audio input
PC audio input
MIC On
VIDEO or PC audio input MIC input
