Canon LV-7290 User Manual Download Page 55

Page: 55 / 83

Setting

Enter a Logo PIN code

Use the Point

▲▼

buttons to enter a number. Press

the Point

◄►

buttons to fix the number and move

the red frame pointer to the next box. The number

changes to



. If you fixed an incorrect number,

use the Point

◄►

buttons to move the pointer to

the number you want to correct, and then enter the

correct number.

Repeat this step to complete entering a four-digit

number.

After entering the four-digit number, move the pointer

Set

. Press the OK button so that you can start to

operate the projector.

If you entered an incorrect Logo PIN code,

Logo

PIN code

and the number (



) will turn red for

a moment. Enter the correct Logo PIN code all over

again.

Logo PIN code change

Logo PIN code can be changed to your desired four-

digit number. Press the OK button to select

Logo

PIN code change

Current

logo PIN code

dialog

box appears, use the Point

▲▼

buttons to enter the

correct code. The New Logo PIN code input dialog

box appears. Set a new Logo PIN code, confirmation

box appears, choose

Yes

to set the new Logo PIN

code.

Be sure to note the new Logo PIN code and keep it

on hand. If you lost the number, you could no longer

change the Logo PIN code setting.

Use the Point

▲▼

buttons to switch

Off

, and

then press the OK button to make a choice.

Change the Logo PIN code lock setting

Enter a Logo PIN code

After a correct Logo PIN code

is entered, the following dialog

box appears.

CAUTION:

WHEN YOU HAVE CHANGED THE LOGO

PIN CODE, WRITE DOWN THE NEW

PIN CODE AS A REMINDER. SHOULD

THE LOGO PIN CODE BE LOST OR

FORGOTTEN, THE LOGO PIN CODE

SETTING CAN NO LONGER BE CHANGED.

Change the Logo PIN code lock setting

Change the Logo PIN code



Note:

If you forget your Logo PIN code and unable to

change it, the Logo PIN code can be reset to the

factory default setting (431) according to the

following procedures.

When you reset the Logo PIN code, the PIN code

and Key lock will be reset, as well.

1. Unplug the AC Power Cord from the AC outlet.

. Hold down the OK button on the projector and

connect the AC Power Cord into the outlet

again. Keep holding down the OK button until

the POWER indicator lights. The Logo PIN

code returns to the factory default setting while

the Logo PIN code lock state will remain the

same as the previous set state.

Summary of Contents for LV-7290




















































































Search results

Summary of Contents for LV-7290

Reviews:

Related manuals for LV-7290

Brands by name

Popular brands

Canon LV-7290, User Manual

Search results

Summary of Contents for LV-7290

Reviews:

Related manuals for LV-7290

Brands by name

Popular brands