Canon LBP-1000 User Manual Download Page 80

Page: 80 / 232

The Standard Printing Environment Settings

PARALLEL2 MENU

Shaded menus appear after an option has been installed. E.g. A-32 module with
the Adobe PostScript 3 software.

If there is insufficient memory, MEMCONFIG may not appear, even after the A-32
module has been installed.

Press

to take the printer off-line

Press

Menu

to display the first menu name

The PARALLEL2 MENU applies to the Compatible/Nibble mode interface.

With Compatible/Nibble mode, a parallel port can support bi-directional

communications between your computer and its peripherals.

PERSONALITY is displayed only after the A-32 module for Adobe PostScript 3 is

installed. Until you install the A-32 module, PCL is the standard personality of your printer.

With this setting you can set the parallel port for automatic personality switching or
dedicate the parallel port for only one personality. This feature sets the personality

only for printer streams received on the parallel port.

AUTO

The printer samples the print stream on the parallel port and

automatically switches to the personality required to print the job.

PCL

The parallel port is dedicated to the PCL personality and will print

only PCL data and will not switch to the PostScript personality if
a PostScript print stream is received on the parallel port. However,

special commands sent to the printer with the print stream can
force the printer to switch to the PostScript personality.

PERSONALITY=
AUTO

Summary of Contents for LBP-1000









































































































































































































































Search results

Summary of Contents for LBP-1000

Reviews:

Related manuals for LBP-1000

Brands by name

Popular brands

Canon LBP-1000, User Manual

Search results

Summary of Contents for LBP-1000

Reviews:

Related manuals for LBP-1000

Brands by name

Popular brands