Canon LaserBase MF8180C, Service Manual

Page: 202 / 296

Chapter 3
3-112
F-3-731
3.5.10.6 Removing the Face-Down Cover
0007-8668
1) Remove the 2 screws [1], and slide the face-down cover [2] in downward
direction to detach.
F-3-732
3.5.10.7 Removing the Top Cover
0007-8685
1) Remove the claw [1], and detach the ring gear [2].
2) Free the link lever [3] from the shaft [4].
F-3-733
3) Remove the 3 binding screws [1] and 2 TP screws [2]; then, disconnect
the connector [3], and detach the top cover [4].
F-3-734
When attaching the top cover, be sure to match its 2 positioners [1] and the
2 cut-offs [2] of the face-down sub cover, while making sure that the paper
retainer [3] is not blocking the feed path.
F-3-735
F-3-736
When attaching the top cover, be sure to fit the link lever [2] while keeping
the drive release lever [1] in up position (i.e., with drive disengaged).
[2] [1] [1]
[1]
[1]
[1]
[2]
[2]
[4] [3]
[1]
[4]
[1]
[1]
[2]
[3]
[1]
[2]
OK NG
Enlarged View of the Paper Retainer
[3]
[3]