Canon LaserBase MF8180C, Service Manual

Page: 173 / 296

Chapter 3
3-83
F-3-547
F-3-548
When attaching the top cover, be sure to fit the link lever [2] while keeping
the drive release lever [1] in up position (i.e., with drive disengaged).
F-3-549
If you are fitting the drum cartridge in the machine with the top cover re-
moved, be sure to do so with the drive release lever [1] fully in up position
(i.e., with drive disengaged).
If the drive release lever is in low position (i.e., with drive engaged), it forces
out the coupling [2], causing the coupling to interface with the drum car-
tridge and to suffer damage.
F-3-550
3.5.2.8 Removing the Right Frame
0011-6596
1) Remove the 5 screws [1], and detach the right frame [2].
F-3-551
3.5.2.9 Removing the Shield Plate
0011-6617
1) Free the flat cable [1] from the connector.
2) Remove the 6 screws [2], and detach the shielding plate [3].
F-3-552
3.5.2.10 Removing the Inside Cover
0007-8910
1) Remove the 2 claws [1], and detach the inside cover [2].
F-3-553
[1]
[2]
OK NG
Enlarged View of the Paper Retainer
[3]
[3]
[1] [2]
[1]
[2]
[1]
[1] [2]
[2]
[2]
[3] [1]
[1]
[2]