Canon LaserBase MF8180C, Service Manual

Page: 117 / 296

Chapter 3
3-27
F-3-170
5) Remove the 2 screws [1] from the back; then, shift the scanner unit [2] to
the back, and lift it to detach.
F-3-171
3.2.14.3 Removing the Modular Board Cover
0007-8069
1) Remove the 2 screws [1], and detach the modular board cover [2].
F-3-172
Pay attention to the harness [3].
3.2.14.4 Removing the Modular PCB
0007-9111
1) Disconnect the cable [1], and remove the 2 screws [2]; then, detach the
modular board [3].
F-3-173
3.2.15 Power Supply PCB
3.2.15.1 Removing the Rear Cover
0007-7019
1) Disconnect the cable [1] of the power supply assembly.
2) Open the face-up cover [2], and remove the 4 screws [3] of the rear cover.
F-3-174
3) Open the reader assembly [4], and lift to free the 2 claws [5].
F-3-175
4) Close the reader assembly; then, detach the rear cover[1].
F-3-176
3.2.15.2 Removing the Reader Assembly
0007-8458
1) Open the reader assembly, and remove the left and right E-rings [1]; then,
pull out the pin [2].
F-3-177
[2]
[2]
[1]
[2]
[1]
[1]
[3]
[2]
[3]
[2]
[1]
[2]
[3]
[1]
[3]
[4]
[5]
[2]
[3]
[1]
[3]
[2]
[1]
[2]
[1]