Canon Laser Class 810, Service Manual

Page: 260 / 322

Chapter 16
16-6
#SCAN
No. Initial setting Range setting Explanation
#SCAN SW SW1 - SW50 Not used
#SCAN
NUMERIC 001: - 025: Not used
026: 22 6 to 48, one unit=0.1mm Distance from the standby position of CIS to the shading start
point. (CIS shift type only)
027: - 040: Not used
041: 0(CIS fixed type)
35(CIS shift type) 0 to 70, one unit=0.1mm Vertical scan start position adjustment (scanning on ADF)
042: 241 170 to 270, one
unit=0.1mm Horizontal scan start position adjustment (scanning on ADF)
043: 45 0 to 200, one
unit=0.1mm Horizontal scan end position correction (copy)
044: 65 0 to 200, one
unit=0.1mm Horizontal scan end position correction (superfine)
045: 80 0 to 200, one
unit=0.1mm Horizontal scan end position correction (fine)
046: 80 0 to 200, one
unit=0.1mm Horizontal scan end position correction (standard)
047: 16 0 to 32, one unit=0.1% Vertical scan magnification correction (scanning on ADF)
048: 16 0 to 32, one unit=0.1% Horizontal scan magnification correction (scanning on ADF)
049: - 053: Not used
054: 16 0 to 32, one unit=0.1% Pickup motor speed correction (when the ADF is used)
055: - 082: Not used
083: To support the longer size original (1000mm)
084: - 099: Not used
100: 166 106 to 206, one
unit=0.1mm Adjustment of the registration loop volume (ADF)
101: - 192: Not used
193: 0 0: LEGAL
1: FOOLSCAP
2: M_OFFICIO
3: A_FOOLSCAP
4: FOLIO
5: G_LEGAL
6: A_OFFICIO
7: B_OFFICIO ADF special paper, standardized size: LGL misidentification-
ready
194: 0 0: LTR
1: G_LTR
2: A_LTR ADF special paper, standardized size: LTR misidentification-
ready
195: 0 0: LTR_R
1: FOOLSCAP
2: OFFICIO
3: E_OFFICIO
4: G_LTR_R
5: A_LTR_R ADF special paper, standardized size: LTR_R misidentification-
ready
196 - 212: Not used
213: 8273 1 to 9999 XYZ correction value of (X) of standard white plate (if equipped
with SEND functions)
214: 8737 1 to 9999 XYZ correction value of (Y) of standard white plate (if equipped
with SEND functions)
215: 9427 1 to 9999 XYZ correction value of (Z) of standard white plate (if equipped
with SEND functions)
216 - 350: Not used