Canon Laser Class 810, Service Manual

Page: 187 / 322

Chapter 10
10-9
- Screw [2] 2pcs.
F-10-17
10.4.1.11 Removing the Delivery Tray
0017-1912
1) Remove the front cover and rear cover.
2) Remove the right cover and tray lower cover.
3) Remove the operation panel.
4) Detach the delivery tray [1].
F-10-18
10.4.2 Main Drive Unit
10.4.2.1 Removing the Main Drive Unit
0017-3613
1) Remove the rear cover.
2) Remove the left middle cover and left rear cover,
3) Remove the fan duct and main motor.
4) Remove the relay PCB, the registration clutch, and the pickup drive unit.
5) Release the cable from all clamps on the main drive unit.
6) Remove the main drive unit [1].
- Screw [2] 5pcs.
F-10-19
10.4.3 Pick-up Drive Unit
10.4.3.1 Removing the Pickup Drive Unit
0017-3606
1) Remove the rear cover.
2) Remove the left middle cover and left rear cover,
3) Remove the relay PCB and registration clutch.
4) Release the cable from all clamps on the pickup drive unit.
5) Remove the pickup drive unit [1].
- Screw [2] 3pcs.
F-10-20
10.4.4 Fixing/Duplex Drive Unit
10.4.4.1 Removing the Fixing/Duplex Drive Unit
0017-3618
1) Remove the rear cover.
2) Remove the left middle cover and left rear cover,
3) Remove the fan duct and main motor.
4) Remove the relay PCB and registration clutch.
5) Remove the pickup drive unit and main drive unit.
6) Release the cable from all clamps on the fixing/duplex drive unit.
7) Remove the fixing/duplex drive unit [1].
- Screw [2] 3pcs.
[2]
[1]
[1]
[2]
[2]
[1]
[2] [1]
[2]