5
5
5-18
5-18
Adjustment > Adjustment at Time of Parts Replacement > Adjusting the Stitcher Unit
Adjustment > Adjustment at Time of Parts Replacement > Adjusting the Stitcher Unit
Adjusting the Stitcher Unit
Replacing the stitcher, carry out the following adjustment.
1) Open the front cover.
2) Pull out the stitcher mount unit to the front, then pull out the stitcher towards yourself and
then pull up the stitcher.
3) Remove three screws [2] and remove the stitcher cover [3].
[2]
[3]
[1]
4) Remove the stitcher positioning tool [4] from the back of the cover.
[4]
F-5-27
F-5-28
5) To adjust the front stitcher, remove the front guide plate [4] and center guide plate [6].
To adjust the rear stitcher, remove the center guide plate [6] and the rear guide plate [7].
(one screw each)
[7]
[6]
[5]
6) To adjust the front stitcher, loosen the two screws [9] on the stitcher mount [8].
To adjust the rear stitcher, loosen the two screws [10] on the stitcher mount [8].
[10]
[9]
[8]
7) Insert the tool [12] into the staple slot of the stitcher [11].
[11]
[12]
F-5-29
F-5-30
F-5-31
Summary of Contents for J1
