Canon IXUS IIs User Manual Download Page 73

Page: 73 / 163

Shoo

ting

• A custom white balance setting cannot be set in [Stitch Assist]

mode. To use a custom white balance setting, set it before selecting

in the Rec. menu (p. 82).

• The settings for the first image are used to take subsequent images

in the sequence.

• It is not possible to display images on the TV when shooting in Stitch

Assist.

See

Functions Available in Each Shooting Mode

(p. 160).

Compose the second image so that
it overlaps a portion of the first and
shoot.

• Use the

button to check or

retake the recorded images.

• Minor discrepancies in the overlapping

portions can be corrected when the
images are stitched together.

Repeat the procedure for additional
images.

A sequence may contain up to 26 images.

Press the SET button after the last
shot.

Pressing the

MENU

button returns to the

Shooting screen.

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands