Canon IXUS IIs User Manual Download Page 106

Page: 106 / 163

104

Protecting Images

You can protect important images and movies from accidental erasure.

To cancel protection

After step 1, select an image to remove protection from and press the

SET

button.

Please note that formatting (initializing) an SD card erases all data,
including protected images (p. 107).

In the

(Play) menu, select

and press the SET button.

See

Selecting Menus and Settings

(p. 42).

Use the

or button to select an

image to protect and press the SET
button.

• The

icon appears on protected images.

• You can make the selection of images

easier by toggling between single image
playback and index playback by pressing
the zoom lever toward

Press the MENU button.

The Play menu displays again. Press it again
to return to the Playback screen.

Protection Icon

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands