Canon IXUS IIs User Manual Download Page 55

Page: 55 / 163

Shoo

ting

Shooting in Auto Mode

In this mode, all you have to do is press the shutter button and let the
camera do everything else.

•See

Functions Available in Each Shooting Mode

(p. 160).

• With the Review function, you can change the length of time images

show on the LCD monitor after shooting, or set it so they do not show
at all (p. 54).

Set the mode switch to

(Auto).

Aim the camera at the subject.

Use the zoom lever to achieve the
desired composition (relative
subject size in the viewfinder) (p.
39).

Press the shutter button halfway (p.
40).

• Two beeps will sound when the camera

has finished metering, and the upper
indicator beside the viewfinder will light
green or orange. If the LCD monitor is on,
the AF frame will appear green.

• If the subject is difficult to focus on, the lower

indicator beside the viewfinder will blink yellow
and the beep will sound one time.

Press the shutter button fully (p.
41).

• You will hear the sound of the shutter

when the shutter activates.

• The picture appears for two seconds on

the LCD monitor.

Shooting

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands