Canon IXUS IIs User Manual Download Page 125

Page: 125 / 163

123

Co
nnec

ting the C

ra to a

Comp

ute

r/TV

Downloading Images by Direct Transfer

Use this method to download images using camera operations.
Install the supplied software and adjust the computer settings before using
this method for the first time (p. 120).

All Images/New Images/DPOF Trans. Images

All Images

Transfers and saves all images to the computer.

New Images

Transfers and saves to the computer only the
images that have not been previously transferred.

DPOF Trans. Images

Transfers and saves to the computer only the images
with DPOF Transfer Order settings (p. 116).

Select & Transfer

Transfers and saves single images to the
computer as you view and select them.

Wallpaper

Transfers and saves single images to the computer as
you view and select them. The transferred images
display on the computer desktop.

Confirm that the Direct Transfer
menu is displayed on the camera's
LCD monitor.

• The

button will light blue.

• Press the

MENU

button if the Direct

Transfer menu fails to appear.

Use the or button to select

, and press the

(Print/Share) button.

• To cancel the transfer, press the

SET

button.

• The images will download and the Direct

Transfer menu will reappear.

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands