Canon IXUS IIs User Manual Download Page 139

Page: 139 / 163

137

rou
bleshootin

Cannot play back

File name was
changed with a
computer or file
location was changed

• Set the file name or location on

the file format/structure of the
camera.

See

About File Numbers and

Folder Numbers

(p. 88).

Lens will not retract SD card slot/battery

cover was opened
with power on

• First close the SD card slot/battery

cover and then turn the power off.

SD card slot/battery
cover was opened
while recording to
the SD card
(warning signal
sounds)

• First close the SD card slot/

battery cover and then turn the
power off.

Battery pack
consumed quickly

Battery life exceeded
if battery pack loses
its charge quickly at
normal temperature
(23 °C/73 °F)

• Replace the battery pack with a

new one.

Battery pack will not
charge

Battery pack life
exceeded

• Replace the battery pack with a

new one.

Poor contact
between battery
pack and battery
charger

• Insert battery pack securely into

battery charger.

• Ensure that battery charger plug

is securely plugged into the
power outlet.

Image is blurred or
out of focus

Camera moved

• Be careful not to move the

camera while pressing the shutter
button.

Autofocus function
hampered by
obstruction to AF-
assist Beam

• Be careful not to block the AF-

assist Beam with fingers or other
items.

AF-assist Beam is
set to [Off]

• Set the AF-assist Beam to [On]

(p. 46).

Problem

Cause

Solution

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands