Canon IXUS IIs User Manual Download Page 119

Page: 119 / 163

117

t S
e

ttin

gs
/T

ra
ns
fe

ing

• Images are transferred in order from oldest to newest by the

shooting date.

• A maximum of 998 images can be selected per SD card.

Use the

or button to move

between images and the or
button to select and deselect them.

• A checkmark displays on selected images.
• You can press the zoom lever toward

to switch to the index mode (3 images)
and use the same procedures to select
images.

• While in index playback, pressing the

SET

button displays the menu for selecting or
deselecting all images. Use the or
button to select [Mark all] or [Clear all]
and press the

SET

button.

Press the MENU button.

The Transfer Order menu reappears.
Pressing the

MENU

button again returns to

the Play menu. Press it again to go back to
the Playback screen.

Selected for Transfer

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands