Canon IXUS IIs User Manual Download Page 105

Page: 105 / 163

103

Pl
a

ybac

Adjusting the Play Time and Repeat Settings

You can change the play time for all the images in a show and have the
show repeat continuously.

• The display interval may vary slightly from the set time for some

images when played.

• Slide shows are easy to arrange on a computer with the supplied

software (ZoomBrowser EX/ImageBrowser). See the

Software Starter

Guide

Play Time

Sets the duration that each image displays. Choose between
3-10 seconds, 15 seconds, 30 seconds and Manual.

Repeat

Sets whether the slide show stops when all the slides have
been displayed or continues until stopped.

Display the Slide Show menu.

See

Starting a Slide Show

(p. 100).

Use the

or button to select

[Set up] and press the SET button.

Use the or button to select

and the

or button to

select an option.

(Play Time)

Select a play time.

(Repeat)

Select [On] or [Off].

Press the MENU button.

The set up menu will close. Pressing the

MENU

button again returns to the Play menu. Press it
again to go back to the Playback screen.

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands