Canon IXUS IIs User Manual Download Page 17

Page: 17 / 163

aring the C

mera

Back View

LCD Monitor (p. 32)

Tripod Socket

SD Card Slot/
Battery Cover (pp. 21, 23)

Viewfinder (p. 38)

DC Coupler Terminal
Cover (p. 140)

Speaker

The following cables are used to connect the camera to a computer or
printer.
Computer (p. 120)

Interface Cable IFC-400PCU (supplied with the camera)

Direct Print Compatible Printers (Sold Separately)
•

CP Printers
Interface Cable IFC-400PCU (supplied with camera) or the Direct
Interface Cable DIF-100 (supplied with the CP-100/CP-10).

• Bubble Jet Printers

Bubble Jet Direct

Compatible Printers:

Please refer to your Bubble Jet printer user guide.

PictBridge

Compliant Printers:

Interface Cable IFC-400PCU (supplied with the camera)

•

PictBridge

Compliant Non-Canon Printers:

Interface Cable IFC-400PCU (supplied with the camera)

Please refer to the

System Map

or the

Direct Print User Guide

supplied

with the camera for direct print compatible printer information.

Summary of Contents for IXUS IIs




































































































































































Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands

Canon IXUS IIs, User Manual

Search results

Summary of Contents for IXUS IIs

Reviews:

Related manuals for IXUS IIs

Brands by name

Popular brands