Communications Settings
4-30
4
Custom F
ax Settings
Setting the Phone Number (Unit Telephone #)
You must set the fax number for the machine. This number can also be printed on sent fax docu-
ment. (See “Setting Whether to Print Information on Received Documents,” in the Reference Guide.)
Setting the Line Type (Tel. Line Type)
You must correctly set the type of telephone line for successful fax communication.
NOTE
• If you do not know the line type for your telephone system, contact your telephone company.
• The factory setting is Tone
.
1
Call up the desired screen as follows:
key
→
[Communications Settings]
→
[Fax Settings]
→
[
] or [
]
→
[Unit Telephone #]
2
Enter the phone number and press the [OK]
key.
• [Space]:
Press to leave a space between
the exchange and phone
number.
• [+]:
Used to place a country code
before a telephone number.
Example: +1 xxx xxx xxx
• [
] and [
]: Press to move the cursor
position.
• [Backspace]: Press to correct errors, by
moving the cursor back to delete
one space at a time.
NOTE
• You can enter up to 20 digits for a phone number.
• Press the
key to delete the entire entry.
3
Press the [Done] key.
Repeat until the Additional Functions screen closes.
1
Call up the desired screen as follows:
key
→
[Communications Settings]
→
[Fax Settings]
→
[
] or [
]
→
[Tel. Line Type]
Additional
Functions
Clear
Additional
Functions
Summary of Contents for IR3250
