Canon iR C6800 Series, Service Manual

Page: 67 / 1404

Chapter 2
2-9
2.2.3
Mounting the Pickup
Assembly
0002-6414
1) Detach the 3 shipping tags [1] from the upper right
cover and the lower right cover.
F-2-19
2) Open the upper right cover [1] and the lower right
cover [2]; then, remove the 3 unlocking spacers [3]
from the pickup slot of the right deck and the
cassettes.
F-2-20
3) Close the upper right cover and the lower right
cover.
4) Push the release button, and slide out the left deck.
The left deck is not supported by its locking plate, and
the deck assembly may not slide out in response to a
press on the release button. If so, slide out the deck
assembly by hand.
5) Open the front cover.
6) Match the included left deck locking plate [1]
against the 2 holes in the left deck rear side plate; then,
secure it in place using a screw (RS tightening; M4x8)
[2].
F-2-21
When mounting the left deck locking plate, take care
not to trap the left deck cable by the plate. (To
facilitate the work, try lightly pushing down on the
deck cable.)
Pull lightly on the deck cable to see that the cable is
not trapped.
7) Close the left deck.
2.2.4 Mounting the Scanner
System
0002-6566
1) Open the ADF, and remove the packing material.
2) Remove the screw [1] used to fix the scanner in
place.
F-2-22
Advise the user to store away the screw used to fix
the scanner system in plate. It will be used when
relocating the machine in the future.
[1]
[2]
[3]
[1]
[2]
[1]
[1]