Canon iR C6800 Series, Service Manual

Page: 1094 / 1404

Chapter 15
15-30
<GAINOR>
0002-7268
Use it to indicate the gain level adjustment (for color) of oddnumbered red bits of the CCD.
<GAINEB>
0002-7269
Use it to indicate the gain level adjustment value (for color) of evennumbered blue bits of the CCD.
<GAINEG>
0002-7271
Use it to indicate the gain level adjustment (for color) of evennumbered green bits of the CCD.
<GAINER>
0002-7274
Use it to indicate the gain level adjustment value (for color) of evennumbered red bits of the CCD.
15.2.3.1.5
DPOT
<VCONTY>
0001-1223
Use it to check the current value of the target contrast potential (Y).
<VCONTM>
0001-1224
Use it to check the current value of the target contrast potential (M).
<VCONTC>
0001-1225
Use it to check the current value of the target contrast potential (C).
<VCONTK>
0001-1226
Use it to check the current value of the target contrast potential (K).
<VBACKY>
0001-1227
Use it to check the current value of the defogging potential (Y).
<VBACKM>
0001-1228
Use it to check the current value of the defogging potential (M).
<VBACKC>
0001-1229
Use it to check the current value of the defogging potential (C).
<VBACKK>
0001-1230
Use it to check the current value of the defogging potential (K).
<2TRPPR>
0001-0150
Use it to check the output value of the paper separation voltage of the secondary transfer DC voltage generated last.
<2TRBASE>
0001-0152
Use it to check the output value of the reference voltage of the secondary transfer DC voltage generated last.
<1TRDCY>
0001-0153
Use it to check the output value of the primary transfer DC voltage (Y) generated last.
<1TRDCM>
0001-1231
Use it to check the output value of the primary transfer DC voltage (M) generated last.
<1TRDCC>
0001-1232
Use it to check the output value of the primary transfer DC voltage (C) generated last.
<1TRDCK>
0001-1233
Use it to check the output value of the primary transfer DC voltage (K) generated last.
<VDTSNS>
0002-7359
Indicating the Dark Area Potential Target Value(potential sensor position) Use it to idicate the dark area potential
target level(VD) for the potential sensor position.
standard level:504V