Canon iR C6800 Series, Service Manual

Page: 1208 / 1404

Chapter 15
15-144
15.5.3
FUNCTION
(
operation/inspection mode
)
:Level 2
15.5.3.1 COPIER
15.5.3.1.1
INSTALL
<INITY/M/C>
0005-6562
T-15-246
<INIT3>
0005-6563
T-15-247
15.5.3.1.2 CLEANING
<BKBNDEX>
0005-6484
T-15-248
15.5.3.1.3 CLEAR
<SNDSTUP>
0001-7218
Use it to initialize the setting for the transmission reading. (Execute this item when you switch language settings.)
Use it to cause the machine to read the initial value of
the toner density signal (SGNL, REF) of Y/M/C.
Method of Operation Select the item to highlight, and press the OK key to
start the operation.
Use it to cause the machine to read the initial value of the
toner density signals (SGNL, REF) of 3 colors (YMC).
Method of Operation Select the item to highlight, and press the OK key to start
the operation.
Use it to execute the black band sequence.
Details of Control a sequence of operations will be executed to clean the
intermediate transfer belt to prevent image faults
(white spots) after filed servicing. The operation will
take about 15 sec.
Method of Operation 1) Select the item, and press the OK key.
The notation will change to 'ACTIVE', and the wire
will be cleaned.
2) To end the operation, press the OK key once again.