Canon iR C6800 Series, Service Manual

Page: 1001 / 1404

Chapter 14
14-17
14.3.5
E003
0004-3018
T-14-7
Code Detail Cause/Particulars of detection Remarks
E003 After standby, the drop in the temperature of the fixing assembly is excessive.
There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch
(TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault.
0041 During standby, the temperature of the fixing
roller drops below 150 deg C.
Check the main thermistor, thermal switch, and heater
for an open circuit and poor contact; then, reset in
service mode: COPIER>FUNCTION>CLEAR>ERR.
0042 During standby, the temperature of the
outside heating roller drops below 190 dg C.
Check the main thermistor, thermal switch, and heater
for an open circuit and poor contact; then, reset in
service mode: COPIER>FUNCTION>CLEAR>ERR.
0043 During standby, the temperature of the
pressure roller drops below 120 deg C.
Check the main thermistor, thermal switch, and heater
for an open circuit and poor contact; then, reset in
service mode: COPIER>FUNCTION>CLEAR>ERR.
0051 During copying, the temperature of the fixing
roller drops below 150 deg C.
Check the main thermistor, thermal switch, and heater
for an open circuit and poor contact; then, reset in
service mode: COPIER>FUNCTION>CLEAR>ERR.
0052 During copying, the temperature of the
outside heating roller drops below 190 deg C.
Check the main thermistor, thermal switch, and heater
for an open circuit and poor contact; then, reset in
service mode: COPIER>FUNCTION>CLEAR>ERR.
0053 During copying, the temperature of the
pressure roller drops below 60 deg C.
Check the main thermistor, thermal switch, and heater
for an open circuit and poor contact; then, reset in
service mode: COPIER>FUNCTION>CLEAR>ERR.