Canon iR C3200 Series, Portable Manual

Page: 61 / 170

Chapter 3
3-17
3001 The UFR board cannot be
initialized.
3002 The RAM bus cannot be
initialized.
3015 No image data arrives at the main
controller PCB.
E732 There is a reader communication error.
0000 The reader unit cannot be detected at startup.
E733 There is a printer communication error.
0000 The printer unit cannot be detected at startup.
0001 There is no response to an error command from the
printer unit.
E740 The Ethernet board is faulty.
0002 The MAC address is illegal.
E744 The language file is faulty.
0001 The version of the language file on the HDD and the
bootable version differ.
0002 The size of the language file on the HDD is too big.
0003 The language specified in Config.txt on the HDD
cannot be found.
0004 A switchover to a language on the HDD cannot be
made.
1000 The installed boot ROM is of a different type.
E745 The TokenRing board is faulty.
0001 An attempt at initialization fails (PCI).
0002 The MAC address is faulty.
0003 The board information cannot
be obtained.
0004 There is a connection fault.
E747 The image processing ASIC or the memory control/communication ASIC is faulty.
--- IC1010 (for image processing ASIC) on the main
controller PCB or IC1012 (memory control/
communication control ASIC, CPU) has a fault
(e.g., image data transfer error).
E804 The power supply cooling fan is faulty.
0000 The DC controller tried to start it up, but the fan has
been identified as being at rest for 5 sec
continuously.
Code Detail Description Timing of detection