Canon iPF825, Service Manual

Page: 290 / 316

Chapter 8
8-20
2E0C Manual printing
is selected, but a roll is
loaded.
Press Load/Eject and
remove the roll.
Tray Selected
Press OK Paper mismatch (cut sheet)
1. Print data having a manual feed print
specification has been received at the
completion of roll paper pickup.
2. Print data having a manual feed print
specification has been received when there
is roll paper printout.
3. Cut sheet data has been received when
the media take-up unit is in use. Check the paper that is actually loaded
on the paper and the paper feed setting
of the driver.
Sheet printing
is selected, but
a roll is loaded.
Stop Printing
Sheet printing
is selected, but
a roll is loaded.
2E0E No Roll Feed Unit.
Turn printer off
and install roll
feed unit.
Roll P Unit
Please Check
Power On
Again Roll paper unit not installed
The unit has received print data having a
roll paper print specification when it had
started without a roll unit being connected
to it. 1. Check the roll unit, and remove,
install or replace the roll unit.
2. Check I/O mode (roll unit
detection).
2E0F Top cover is open.
Turn off printer,
wait a while, and
turn it on again.
Top Cover
Please Close
Top Cover Open
Close Top Cover The top cover is abnormally open. Check the cover.
Check the sensor (I/O mode).
2E10 Ink tank cover
is open.
Turn off printer,
wait a while, and
turn it on again.
Ink Tank Cover
Close Please
Tank Cover Open
Close Please Ink tank cover error open (continued use
allowed)
The ink tank cover opened while
performing any operation, such as printing
and suctioning. Close the ink tank cover.
Check the sensor (I/O mode).
2E11 Carriage Cover is open. Carriage cover open error
A carriage cover open has been detected. Close the carriage cover.
Check the sensor (I/O mode).
2E12 Rel lever is in
wrong position.
Turn off printer,
wait, then
turn on again. Faulty release lever
The state of the release lever up (released)
has been detected. Push down the release lever.
Check the sensor.
2E14 Wrong paper size.
Check paper size setting on
computer.
Online: Print
Stop: Stop Printing
PaprSiz Mismatch
Prnt:PressOnline
Loaded Papr Diff
From Spfd Size Paper mismatch (size or width)
The paper size specified for the [Print to
meet the paper width] setting of the driver
on receiving print data and the width of the
roll paper actually fed did not match. Check the paper that is actually loaded
on the printer and the paper size setting
of the driver.
Wrong paper size.
Check paper size
setting in driver.
Online: Print
Stop: Stop Printing
Driver: Chk Papr
Size Setting
Loaded Papr Diff
From Spfd Size
Code
(last 4 digits)
Panel display
(Large LCD)
Panel display
(Small LCD)
Explanation/Detection sequence Remedial Action