5
2 Set Up the Machine
Set Date and Time
Before using the machine, you MUST set the current date and time. The date and time set are used as a standard
for timer settings functions.
Information About the Keys
Press [
▼
] [
▲
] [
◀
] [
▶
] to move the cursor position.
Use (Scroll Wheel) to move the cursor position.
Press the Left/Right Any key to select the alternative key at the bottom of the display.
Press – (numeric keys) to enter numbers.
Press [
OK
] to set the entry or to proceed to the next screen.
Press [Back] to return to the previous screen.
Press (Clear) to delete the entire entry.
The display returns to the Standby mode:
The machine may enter the Standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. The default setting is 2 minutes. To
change the settings, see “Introduction of the Machine” in the e-Manual.
The display turned OFF:
The machine may enter the Sleep mode while you are performing setup. Press (Power) to turn the display back ON and continue the setup. The default setting is 15 minutes.
To change the settings, see “Introduction of the Machine” in the e-Manual.
●
‒
‒
‒
‒
‒
‒
‒
●
●
1
Press
(Main Menu).
2
Press the right Any key to select <Additional
Func.>.
3
Use [
▼
], [
▲
] or (Scroll Wheel) to select
<Timer Settings>, then press [
OK
].
