3
2
Set Up the Machine
Turn on the Machine
The display returns to the Standby mode:
The machine may enter the Standby mode (Auto Clear function) while you are setting it up. Make the setting again from the main menu. The default setting is 2 minutes.
To change the settings, see “Introduction of the Machine” in the e-Manual.
The display turned OFF:
The machine may enter the Sleep mode while you are performing setup. Press (Power) to turn the display back ON and continue the setup. The default setting is 15 minutes.
To change the settings, see “Introduction of the Machine” in the e-Manual.
●
●
1
Press the [I] side of the main power switch (A) to
ON.
Do not connect the machine and the computer with a
USB cable at this time. Connect the machine and the
computer with a USB cable only during the software
installation procedure. (A USB cable is not used when
the machine is used via a network connection.)
Apply the power switch label to the space above the
main power switch.
–
–
2
If the screen to select the language appears as
shown below, use [
▼
], [
▲
] or (Scroll Wheel)
to select a language, then press [
OK
].
The machine restarts automatically.
The language setting can be changed later.
Press
(Main Menu)
→
<Additional Func.>
→
<Common Settings>
→
<Language Switch>
→
<Done>
→
Select <On>
→
Select the desired language
→
Turn OFF
the main power
→
Restart the machine.
