23
2 Set Up the Machine
6
Use [
▼
], [
▲
] or (Scroll Wheel) to select <TCP/
IP Settings>, then press [
OK
].
7
Use [
▼
], [
▲
] or (Scroll Wheel) to select <IPv4
Settings>, then press [
OK
].
For instructions on the settings for IPv6, see “Network
Settings,” in the e-Manual.
8
Use [
▼
], [
▲
] or (Scroll Wheel) to select <IP
Address Settings>, then press [
OK
].
9
Press the left Any key to select <Confirm Set.>.
10
Press the right Any key to select <Done>.
If the machine is communicating with the network
properly, the IP address, subnet mask, and gateway
address are displayed. If not, “000.000.000.000” is
displayed.
If the machine dose not obtain the IP address 3 minutes
after you connected the LAN cable, check the IP address
settings and the network cable.
11
Press
(Main Menu) to return to the
Main Menu screen.
–
–
