48
Symbols Used in This Manual
The following symbols are used in this manual to explain procedures,
restrictions, handling precautions, and instructions that should be observed
for safety.
Indicates a warning concerning operations that may lead to death or injury
to persons if not performed correctly. To use the machine safely, always pay
attention to these warnings.
Indicates a caution concerning operations that may lead to injury to
persons if not performed correctly. To use the machine safely, always pay
attention to these cautions.
Indicates an operation that must not be performed. Read
these items carefully, and make sure not to perform the
described operations.
Indicates a clarification of an operation, or contains additional explanations
for a procedure. Reading these notes is highly recommended.
Keys and Buttons Used in This Manual
The following symbols and key names are a few examples of how keys to be
pressed are expressed in this manual.
- Operation Panel Keys: <Key icon> + (Key name)
Example: (Stop).
- Buttons on the computer operation screen: [Button name]
Example: [
OK
]
- Information in the display appears in angle brackets: <LOAD PAPER>.
Important Safety Instructions
Please read these “Important Safety Instructions” thoroughly before
operating the machine.
As these instructions are intended to prevent injury to the user and other
persons or destruction of property, always pay attention to these
instructions and operational requirements.
Also, as it may result in unexpected accidents or injuries, do not perform
any operation unless otherwise specified in the manual.
Installation
Do not install the machine in a location near alcohol, paint thinner, or
other flammable substances. If flammable substances come into contact
with electrical parts inside the machine, this may result in a fire or
electrical shock.
Do not place the following items on the machine. If these items come
into contact with a high-voltage area inside the machine, this may result
in a fire or electrical shock.
If these items are dropped or spilled inside the machine, immediately
turn off the power switches of the machine and computer (1) and
disconnect the interface cable if it is connected (2). Then, unplug the
power plug from the AC power outlet (3) and contact your local
authorized Canon dealer.
Necklaces and other metal objects
Cups, vases, flowerpots, and other containers filled with water or liquids
‒
‒
•
•
When installing and removing the optional accessories, be sure to turn the
machine off , unplug the power plug, and then disconnect all the interface
cables and power cord from the machine. Otherwise, the power cord or
interface cables may be damaged, resulting in a fire or electrical shock.
Do not install the machine in unstable locations, such as on unsteady
platforms or inclined floors, or in locations subject to excessive vibrations,
as this may cause the machine to fall or tip over, resulting in personal
injury.
The ventilation slots are provided for proper ventilation of working parts
inside the machine. Never place the machine on a soft surface, such as a
bed, sofa, or rug. Blocking the slots can cause the machine to overheat,
resulting in a fire.
Do not install the machine in the following locations, as this may result in
a fire or electrical shock.
A damp or dusty location
A location exposed to smoke and steam, such as near a cookery or
humidifier
A location exposed to rain or snow
A location near a water faucet or water
A location exposed to direct sunlight
A location subject to high temperatures
A location near open flames
When installing the machine, gently lower the machine to the installation
site so as not to catch your hands between the machine and the floor or
between the machine and other equipment, as this may result in
personal injury.
When connecting the interface cable, connect it properly by following
the instructions in this manual. If not connected properly, this may result
in malfunction or electrical shock.
When installing the machine with casters, always lock the casters.
Otherwise, the machine may move or tip over, resulting in personal
injury.
When moving the machine, follow the instructions in this manual to hold
it correctly. Failure to do so may cause you to drop the machine, resulting
in personal injury. (See ”Transporting the Machine” in the e-Manual)
Power Supply
Do not damage or modify the power cord. Also, do not place heavy
objects on the power cord or pull on or excessively bend it. This can
cause electrical damage, resulting in fire or electrical shock.
Keep the power cord away from all heat sources. Failure to do so can cause
the power cord insulation to melt, resulting in a fire or electrical shock.
The power cord should not be taut, as this may lead to a loose
connection and cause overheating, which could result in a fire.
The power cord may become damaged if it is stepped on, fixed with
staples, or if heavy objects are placed on it. Continued use of a damaged
power cord can lead to an accident, such as a fire or electrical shock.
‒
‒
‒
‒
•
•
•
•
•
•
•
‒
‒
‒
‒
‒
‒
‒
‒
