e-Support
Filename:
TP11 249.pdf
Date:
07-19-11
Page 7 of 8
10.
When installing the damper holder [1] on the transmission shaft [1], apply a small drop of super lube
grease (FY9-6005-000) [9]. The drop should be between 2~4mm [B] from the end of the
transmission shaft [6].
11.
After installing the damper holder, move the transmission shaft in the direction from front to rear to
check for play. If there is no play, suspect an installation error and perform the following:
a.
If the damper holder [1] rides on the sheet metal [C] reinstall the damper holder.
b.
If the gear on the oil damper does not mesh with the 27Z gear [2], reinstall the damper holder
and ensure both gears mesh properly.
