13
10) Remove the 3 screws [1] to detach the fly wheel [2]. When the drum drive unit (Y) and
(M) are removed, the fly wheel does not need to be removed.
11) Release the cables from the edge saddle [2] and 2 wire saddles [3], and disconnect the
4 connectors from the PCB. When the drum drive unit (Y) and (M) are removed, this work is
not required.
12) Remove the 2 screws [1] and tilt the PCB mount to the front. When the drum drive unit (Y)
and (M) are removed, tilting the PCB mount to the front is not required.
YMC
