Canon imageRUNNER ADVANCE C2020, Service Handbook

Page: 282 / 292

ERROR CODE
E-18
E540
Main cause The tray lift motor (M5) is faulty. The tray lift motor clock sensor 1/2
(PI19/PI20) is faulty. The tray home position sensor (PI8) is faulty.
Condition of
detection
0001 The ascent operation does not end 15 sec after the tray lift motor is
started.
The tray home position cannot be detected even when the tray lift
motor has been driven for 15 sec.
Main cause The tray paper limit detecting switch (MS4) is faulty.
Condition of
detection
0002 The tray upper limit detecting switch is found to be on while the
tray is moving up.
Main cause The tray lifter motor (M5) is faulty. The tray lifter motor clock sensor 1/2
(PI19/PI20) is faulty.
Condition of
detection
0003 There is no clock pulse from the clock sensor 1/2 for 200 msec or
more when the try lifter motor is driven.
E584
Main cause The feed motor (M1) is faulty. The shutter closed detecting switch (MS4) is
faulty.
Condition of
detection
0001 The shutter closed detecting switch does not turn on even when the
feed motor has been rotated in reverse for 1 sec or more.
Main cause The feed motor (M1) is faulty. The shutter open sensor (PI5) is faulty.
Condition of
detection
0002 The shutter open sensor does not turn on even when the feed motor
is rotated in reverse for 1 sec or more.
Main cause The safety area switch (MS3) is faulty. The shutter closed detecting sensor
(MS4) is faulty.
Condition of
detection
0003 When the tray 1/2 is in the safety area switch OFF position, the
shutter closed detecting switch is found to be off.