Canon imageRUNNER ADVANCE C2020, Service Handbook

Page: 234 / 292

SERVICE MODE
S-92
COPIER>FUNCTION
5.2 FEEDER>FUNCTION
The following items are found under FEEDER>FUNCTION.
SENS-INT
Use it to initialize the sensor.
1) Select this item to highlight.
2) Press the OK key.
• Each operation is executed; at the end of adjustment, the mode ends auto-
matically.
UBLT-CLN
Use it to execute auto cleaning of the separation belt for top separation.
1) Select this item to highlight.
2) Place paper moistened with solvent at the center on the original
tray.
3) Press the OK key.
• The paper will be fed halfway, and the separation belt will be rotated idly.
4) Press the OK key to end the operation.
5) Open the upper cover, and remove the paper.
6) Close the upper cover.
DBLT-CLN
Use it to execute auto cleaning of the separation belt for bottom separation.
1) Select this item to highlight.
2) Place paper moistened with solvent at the center on the original
tray.
3) Press the OK key.
• The paper will be fed halfway, and the separation belt will be rotated idly.
4) Press the OK key to end the operation.
5) Open the upper cover, and remove the paper.
6) Close the upper cover.