Canon imageRunner Advance 6275 Basic Operation Gude Download Page 79

Page: 79 / 214

Routine Maint

enanc

Remove the front size switch plate.

Align the front size switch plate with the marks for the desired paper size.

• If the front size switch plate is not adjusted properly for the paper size loaded in the paper deck, the correct

paper size may not appear on the touch panel display.

• Adjust the front size switch plate correctly to avoid causing a paper jam, dirty prints, or make the inside of

the machine dirty.

Fix the front size switch plate to the paper deck with the white screw by turning it
clockwise.

Summary of Contents for imageRunner Advance 6275























































































































































































































Search results

Summary of Contents for imageRunner Advance 6275

Reviews:

Related manuals for imageRunner Advance 6275

Brands by name

Popular brands

Canon imageRunner Advance 6275, Basic Operation Gude

Search results

Summary of Contents for imageRunner Advance 6275

Reviews:

Related manuals for imageRunner Advance 6275

Brands by name

Popular brands