Canon imageRunner Advance 6275 Basic Operation Gude Download

Page: 101 / 214

101

Routine Maint

enanc

Clean the feed scanning area with a cloth dampened in water or a mild
detergent, and then wipe the area with a soft dry cloth.

Close the covers and the feeder.

1 Close the inside cover.
2 Close the document scan

cover.

3 Close the feeder.

• When closing the covers and the feeder, be careful not to get your fi ngers caught, as this may

result in personal injury.

• Be aware that the light emitted from the platen glass may be very bright when closing the

feeder.

Summary of Contents for imageRunner Advance 6275























































































































































































































Search results

Summary of Contents for imageRunner Advance 6275

Reviews:

Related manuals for imageRunner Advance 6275

Brands by name

Popular brands

Canon imageRunner Advance 6275, Basic Operation Gude

Search results

Summary of Contents for imageRunner Advance 6275

Reviews:

Related manuals for imageRunner Advance 6275

Brands by name

Popular brands