Canon imageRunner Advance 6275 Basic Operation Gude Download Page 103

Page: 103 / 214

103

Routine Maint

enanc

Close the covers.

1 Close the inner cover.
2 Close the feeder cover.

Clean the resin roller.

1 Open the feeder.
2 Clean the left side of the

rubber roller with a cloth
dampened with water. Then,
wipe the area with a soft dry
cloth.

3 Close the feeder.

• When closing the feeder, be careful not to get your fi ngers caught, as this may result in personal

injury.

• Be aware that the light emitted from the platen glass may be very bright when closing the

feeder.

Summary of Contents for imageRunner Advance 6275























































































































































































































Search results

Summary of Contents for imageRunner Advance 6275

Reviews:

Related manuals for imageRunner Advance 6275

Brands by name

Popular brands

Canon imageRunner Advance 6275, Basic Operation Gude

Search results

Summary of Contents for imageRunner Advance 6275

Reviews:

Related manuals for imageRunner Advance 6275

Brands by name

Popular brands