Canon imageRUNNER ADVANCE 6055, Maintenance Manual

Page: 39 / 134

Staple Finisher-E1/Booklet Finisher-E1/External 2/3 Hole Puncher-A1 (Optional) 1-27
1
Routine Maintenance
Staple Finisher-E1/Booklet Finisher-E1/External 2/3 Hole
Puncher-A1 (Optional)
This section describes the procedure for replacing the staple cartridge in the Staple Finisher or Booklet Finisher, and how to
remove the punch waste from the External 2/3 Hole Puncher.
Replacing the Staple Cartridge in the Stapler Unit
When the Staple Finisher or Booklet Finisher is out of staples and the staple cartridge in the stapler unit must be replaced, a screen
prompting you to replace the staple cartridge appears on the touch panel display. Follow the procedure described below to
replace the staple cartridge.
Use only staple cartridges intended for use with this machine.
Remove the orange seal that holds the staples together after you place the staple cartridge into the staple case.
We recommend that you order staple cartridges from your local authorized Canon dealer before your stock runs out.