Canon imageRUNNER 6570, Network Manual

Page: 200 / 274

Protocol Settings 6-4
6
Using
a
n
Apple
T
al
k Ne
tw
or
k
(Macintosh)
Protocol Settings
You can specify the protocol settings for the machine by using any of the following:
•
The machine's control panel
•
The Remote UI (via a web browser)
•
NetSpot Device Installer (Canon utility)
IMPORTANT
•
You can only print from a computer if the optional equipment is installed. For the
equipment needed, see "Optional Equipment and System Environment Requirements,"
on p. 1-2.
•
To configure settings with software other than the control panel of the machine, TCP/IP
protocol must be supported by your network environment.
•
Some items cannot be set using the Remote UI or NetSpot Device Installer. For details
about items that can be set with the Remote UI or NetSpot Device Installer, see "Network
Setting Items," on p. 9-2.
•
The following procedures describe sample settings using the control panel.
NOTE
•
For instructions on how to enter settings using the Remote UI, see Chapter 3,
"Customizing Settings," in the
Remote UI Guide .
•
For more information on NetSpot Device Installer, see Chapter 7, "Using Utilities to Make
Network and Device Settings."