Canon imageRUNNER 3300 Series Copying Manual Download Page 33

Page: 33 / 174

Adjusting Exposure and Image Quality

1-25

Basic Cop

ying

Press

(Start).

Copying starts.

NOTE

•

To cancel the copy exposure setting, press “A.”

•

To cancel all settings and return the machine to the Standard mode, press

(Reset).

Automatic Adjustment of Exposure and Image Quality

Place your originals, and press “A.”

The exposure is automatically adjusted to the level best suited to the quality of the original.

NOTE

•

When scanning transparencies, adjust exposure using “Light” or “Dark” as the automatic
exposure control may not operate correctly on transparent originals.

Press

(Start).

Copying starts.

NOTE

•

To cancel all settings and return the machine to the Standard mode, press

(Reset).

Summary of Contents for imageRUNNER 3300 Series















































































































































































Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands

Canon imageRUNNER 3300 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands