Canon imageRUNNER 3300 Series Copying Manual Download Page 138

Page: 138 / 174

Storing/Recalling Often-used Copy Settings in Memory (Mode Memory)

2-54

Useful Cop

y Functions

Recalling Copy Settings

Press “Special Features,” and press “Mode Memory.”

Select the memory key storing the copy settings you want to use

confirm the stored settings

press “OK”

press “Done.”

The display returns to the Basic Features screen.

NOTE

•

Recalling copy settings from memory cancels the current copy settings.

•

After recalling copy settings from memory, you can change them, and make copies.

•

If you press another memory key, the copy settings stored in that key are recalled.

Erasing a Copy Job

Press “Special Features,” and press “Mode Memory.”

Press “Store/Erase.”

Summary of Contents for imageRUNNER 3300 Series















































































































































































Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands

Canon imageRUNNER 3300 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands