Canon imageRUNNER 3300 Series Copying Manual Download Page 161

Page: 161 / 174

Changing the Current Standard Settings

3-11

Setting/Stor

ing Specifications of the Cop

y Function

Press “Yes.”

To cancel storing the currently displayed settings as the Standard Settings, press “No.”

This screen is displayed for about two seconds as the settings currently displayed are stored
as the Standard Settings.

NOTE

•

The settings displayed here are the currently set copy settings. Press “

▲

” or “

▼

” to display

Copy modes that do not fit in the display area.

Press “Done.”

Repeat this procedure.

The display returns to the Basic Features screen.

Initializing the Standard Settings

Call up the desired screen as follows:

(Additional Functions)

Summary of Contents for imageRUNNER 3300 Series















































































































































































Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands

Canon imageRUNNER 3300 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands