Canon imageRUNNER 3300 Series Copying Manual Download Page 149

Page: 149 / 174

Making Sharp Contrast Copies (Sharpness)

2-65

Useful Cop

y Functions

Place your original, and press “Special Features”

press “

▼

”

press “Sharpness.”

Adjust the sharpness by pressing “Low” or “High,” and press “OK”

press “Done.”

To copy text and lines clearly, the setting should be towards “High.” To copy halftone
images such as photographs, the setting should be towards “Low.”

The specified mode is set and the display returns to the Basic Features screen.

Press

(Start).

Copying starts.

NOTE

•

To cancel the setting, press “Special Features”

“

▼

”

“Sharpness”

“Cancel,” in this

order.

•

To cancel all settings and return the machine to the Standard mode, press

(Reset).

Summary of Contents for imageRUNNER 3300 Series















































































































































































Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands

Canon imageRUNNER 3300 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands