Canon imageRUNNER 3300 Series Copying Manual Download Page 116

Page: 116 / 174

Erasing Shadows and Frame Lines from Copies (Frame Erase)

2-32

Useful Cop

y Functions

Press

(Start).

Copying starts.

NOTE

•

To cancel the setting, press “Special Features”

“Frame Erase”

“Cancel,” in this order.

•

To cancel all settings and return the machine to the Standard mode, press

(Reset).

Making Copies Erasing Binding Holes etc. (Binding Erase)

Place your original on the platen glass, and press “Special
Features”

press “Frame Erase.”

IMPORTANT

•

Do not place originals with binding holes in the feeder, as this may damage the originals.

Press “Binding Erase,” and press “Next.”

Specify the binding erase feature, and press “Next.”

Summary of Contents for imageRUNNER 3300 Series















































































































































































Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands

Canon imageRUNNER 3300 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands