Canon imageRUNNER 3300 Series Copying Manual Download Page 131

Page: 131 / 174

Copying Separately-set Originals (Job Build)

2-47

Useful Cop

y Functions

When scanning two-sided originals, press “2-sided Original.”

Select the type of two-sided original, and press “OK.”

- Do not forget to set or cancel the Two-sided Original mode according to the type of

originals.

Repeat this operation as necessary.

After the last original is scanned, press “Done.”

NOTE

•

To cancel the setting, press “Special Features”

“Job Build,” in this order.

•

To cancel all settings and return the machine to the Standard mode, press

(Reset).

Summary of Contents for imageRUNNER 3300 Series















































































































































































Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands

Canon imageRUNNER 3300 Series, Copying Manual

Search results

Summary of Contents for imageRUNNER 3300 Series

Reviews:

Related manuals for imageRUNNER 3300 Series

Brands by name

Popular brands