![background image](http://html.mh-extra.com/html/canon/imagerunner-1670f/imagerunner-1670f_facsimile-manual_57584071.webp)
Sending Method
Memory Sending
The machine begins calling the other party and transmitting the information
after all documents are scanned into memory. Because the machine is
multitasking, you can even scan a document into memory while performing other
tasks. The machine has enough memory to store up to approximately 255 pages*
(fewer if the document contains many graphics or particularly dense text).
* Based on ITU-T No.1 Chart, Standard mode.
When a large amount of memory is used, the message <MEMORY FULL> may be
displayed depending on the documents to be sent, or the machine can neither store
the scanned documents in memory nor send them. In this case, print or delete any
documents in memory, or select a lower fax resolution, such as <STANDARD>, and
then send the documents.
Using the ADF
1
Press [FAX] to set the machine to the Fax mode.
2
Prepare the document and load it face down in the ADF.
The currently used memory is displayed.
Standby to scan.
•
To adjust the resolution, see “Adjusting the Scan Settings,” on p. 3-2.
•
To adjust the contrast, see “Fax Settings,” on p. 6-6.
DOCUMENT READY
MEM IN USE
0%
FAX 12/03/2004 15:30
FaxTel STANDARD
3-10
Sending Method
3
Sending Documents
NOTE
**FG_Chap 03 3/5/04 10:38 AM Page 10
Summary of Contents for IMAGERUNNER 1670F
